Product Application

Kilsaran KPRO Grout NSG 2601-HF is, a non-shrink construction grout, designed for use in thicknesses ranging from 10mm 100mm, in the following applications;

Large baseplate grouting for
stanchions, plant and machinery
Anchoring of reinforcing steel
bars
Jointing of precast concrete
units
Fixing rails and bolts
Bedding of precast concrete
units
Duct filling for pre-stressed and
post-tensioned elements.
Soil, ground and rock anchoring
Underpinning
Product Use
Suitable for use in temperatures between +5C and +30C. Ensure all surfaces are clean and free from dust, dirt and grease. Pre-soak area to be grouted a minimum of 2 hours before installation to avoid absorption. To achieve a high fluidity grout mix the contents of a 25kg bag with 3.2-3.5 litres of clean potable water. Using excessive water (above 0.2 water/solid ratio) will affect the products overall performance. Mixing should be carried out in a suitable container by forced action using a paddle or high shear vane mixer, or grouting pump. The powder should be added gradually to the measured water in the mixing vessel and mixed for 5 minutes until a smooth, cohesive consistency is achieved. Once mixed no further water should be added.

Baseplate: Ensure that a sufficient supply of material will be mixed to avoid interruption when filling. Always pour from one side and use air vents were necessary to avoid air entrapment. Pour from a height to ensure maximum compaction and use a rod to aid filling. Do not vibrate the grout. Temporary levelling shims should be greased if they are to be removed after grout hardens.

Formwork: As the grout is a free-flowing, it is important to ensure the formwork is sufficiently prepared to avoid leaks. A sacrificial concrete mix can be used to fix the baseplate shutter or as a bern. Keep unrestrained areas around the baseplate to less than 150mm.

Curing: Should be as per standard practices for cement-based products. Grout should be protected from strong sunlight and cold weather.

Benefits

Non-Shrink formula
High early and ultimate strength
High flowability with no segregation
Can be pumped or poured
Long term durability
Convenient and User-Friendly
Eliminates wastage